Opened 17 years ago
Last modified 16 years ago
#1300 assigned defect
configure the firewall services module in IPP core
| Reported by: | jhoblitt | Owned by: | cindy |
|---|---|---|---|
| Priority: | normal | Milestone: | |
| Component: | hardware | Version: | |
| Severity: | normal | Keywords: | |
| Cc: |
Description
We need to establish two vlans between the sup module and the fw module. One vlan is the "outside" and the other being the "inside" vlan. Routing needs to be configured being the sup the fw mod via the "outside" vlan. NAT needs to be configured on the "inside" vlan for the PSPS. When it become time for IPP wave #4, another seperate "inside" vlan needs to be created so all IPP nodes can be moved over to NAT. I've had trouble in the past getting this configuration to work and at one point Cisco suggested the fwsvc mode might be bad and need to be replaced. I never did this as I've never had time/resources to setup a proper test.
Change History (2)
comment:1 by , 17 years ago
comment:2 by , 16 years ago
| Owner: | changed from to |
|---|---|
| Status: | new → assigned |
this needs to be justified (to EAM at least) before being implemented.
the gains are not clear to me compared with the risks of the modifications.
Note: sounds like IOS may now support NAT directly