The version of the 3w-9xxx driver included with Linux 2.6.22 does not support the PCI IDs of the 3ware 9690 SAS RAID cards. In order to install the O/S image on a system with this RAID card and the standard IPP boot media, a newer version of this driver will need to be installed. The procedure for this is:
- boot the system off of the cd and configure networking
- via sftp, download the updated 3w-9xxx.ko driver
- run the commands:
rmmod 3w-9xxxx;insmod ./3w-9xxx.ko
- proceed with the standard install
This driver was created from the 2.6.22-gentoo (no -rX) sources with this .config and this patch 9690sa.patch.
Last modified
17 years ago
Last modified on Aug 6, 2009, 2:21:45 PM
Attachments (3)
-
3w-9xxx.ko
(52.9 KB
) - added by 17 years ago.
updated 3Ware driver for Linux 2.6.22 SMP
-
.config
(55.2 KB
) - added by 17 years ago.
2.6.22-gentoo .config
-
9690sa.patch
(11.4 KB
) - added by 17 years ago.
3w-9xxx patch for 2.6.22
Download all attachments as: .zip
Note:
See TracWiki
for help on using the wiki.
