Changeset 29004 for trunk/psModules/src/objects/models/pmModel_GAUSS.c

Timestamp:

Aug 20, 2010, 1:14:11 PM (16 years ago)

Author:

eugene

Message:

Many changes:

• psphot-related issues

1) added a new feature to psLib/src/fft/psImageFFT to allow for a pre-FFTed kernel generated for a specific image dimension which can then be applied to an arbitrary number of images for convolution -- this avoids the kernel FFT for every image convolution.
2) updated the psMinimizeLMM to include 2 levels of tolerance: minTol and maxTol: if the minimization reaches minTol, it stops. if it only reaches maxTol within maxIter, it stops and is considered successful, if it fails to reach maxTol, then it fails. This allows us to accept fits that are actually acceptable (within error) even if they are not as close as ideally possible.
3) add new stat: psfWeightNotPoor (vs psfWeightNotBad) : the first gives the fraction of psf-weighted unmasked pixels considering any mask bits (except the internal 'mark' bit), while the former considers only 'bad' mask bits -- these are written to QF_PSF and QF_PSF_PERFECT in the CMF files.
4) define user-set parameters for max and min valid flux in the linear fit analysis: Note this was the cause of the non-negative fluxes in forced photometry -- the min limit was hard-wired to 0.0.
5) significance image is now constructed as (image + (image/1000)^{2) / sqrt(variance) so that bright sources have well-defined peaks (other wise, they become somewhat flat-topped as image = sqrt(variance), leading to ill-defined peaks).
6) modification of the visualization functions to accept facility and level values akin to psTrace
7) modification of the source fitting APIs to allow thread- and source- independent fit options (iterations, tolerances, etc)
8) use Kron magnitude as test for source size (CR vs EXT) instead of PSF-based aperture
9) set a min systematic error in the aperture mags when used for size classification significance
10) threaded the psf-convolved model (PCM) fitting process (extended source fits)
11) for extended sources, adjust the radius based on the footprint and re-calculate moments for guess; save the psf-based moments for output in psf table
12) for Sersic fitting, choose the best index with a grid search using only a few iterations; iterate fully on the selected value.
13) same for Sersic fitting using the PCM fitting process
14) fixed a bug in which the PSF candidate stars which failed in the psf fitting were not correctly unmarked as being PSF stars
15) define galaxy fit radius based on sky stdev (global, not local)
16) move the PCM code to psModules
17) save and report the raw aperture mag in addition to the curve-of-growth corrected one (PS1_V3)
18) save and report the Kron parameters and higher-order moments
19) some psModule header reorganization for code clarity
20) fixed a bug in which the diff stats were counting 'marked' pixels (outside area of interest) as 'masked'.
21) save the radial profile aperture sizes in the headers
22) better guess for Sersic parameters based on moments (requires setting the functional form so that the scale length is right)}

• ppSub-related:

1) ensure masked pixels are NANed in output diff image
2) add code to flag detections if they have bright positive neighbors (+ output of these in PS1_DV2)
3) define separate penalties for each image (based on their fwhm values) (this requires the penalties to be calculated later in the code).
4) define separate apertures for each image for flux normalization
5) choose aperture based on curve-of-growth (was based on fixed fraction of full aperture flux, and thus noisy)
6) some fine tuning of the penalty factor (this still seems arbitrary, and results are somewhat sensitive to the right value)

Location:

trunk/psModules

Files:

• . (modified) (1 prop)
• src/objects/models/pmModel_GAUSS.c (modified) (5 diffs)

trunk/psModules/src/objects/models/pmModel_GAUSS.c

@@ -21 +21 @@
 #include <stdio.h>
 #include <pslib.h>
-
+#include "pmHDU.h"
+#include "pmFPA.h"
+
+#include "pmTrend2D.h"
+#include "pmResiduals.h"
+#include "pmGrowthCurve.h"
+#include "pmSpan.h"
+#include "pmFootprintSpans.h"
+#include "pmFootprint.h"
+#include "pmPeaks.h"
 #include "pmMoments.h"
-#include "pmPeaks.h"
+#include "pmModelFuncs.h"
+#include "pmModel.h"
+#include "pmModelUtils.h"
+#include "pmModelClass.h"
+#include "pmSourceMasks.h"
+#include "pmSourceExtendedPars.h"
+#include "pmSourceDiffStats.h"
 #include "pmSource.h"
-#include "pmModel.h"
+#include "pmSourceFitModel.h"
+#include "pmPSF.h"
+#include "pmPSFtry.h"
+#include "pmDetections.h"
+
 #include "pmModel_GAUSS.h"
 
+# define PM_MODEL_NPARAM          7
 # define PM_MODEL_FUNC            pmModelFunc_GAUSS
 # define PM_MODEL_FLUX            pmModelFlux_GAUSS
@@ -83 +103 @@
         dPAR[PM_PAR_XPOS] = q*(2*px/PAR[PM_PAR_SXX] + Y*PAR[PM_PAR_SXY]);
         dPAR[PM_PAR_YPOS] = q*(2*py/PAR[PM_PAR_SYY] + X*PAR[PM_PAR_SXY]);
+
         // the extra factor of 2 below is needed to avoid excessive swings
         dPAR[PM_PAR_SXX]  = +4.0*q*px*px/PAR[PM_PAR_SXX];
@@ -102 +123 @@
         return true;
     }
-    psAssert(nParam >= 0 && nParam <= PM_PAR_7, "Parameter index is out of bounds");
+    psAssert(nParam >= 0 && nParam < PM_MODEL_NPARAM, "Parameter index is out of bounds");
 
     // we need to calculate the limits for SXY specially
@@ -347 +368 @@
 // this test is invalid if the parameters are derived
 // from the PSF model
+// XXX how is this used?  it prevents forced photometry from ever being 'successful'
 bool PM_MODEL_FIT_STATUS (pmModel *model)
 {
@@ -394 +416 @@
     return;
 }
-
-# undef PM_MODEL_FUNC
-# undef PM_MODEL_FLUX
-# undef PM_MODEL_GUESS
-# undef PM_MODEL_LIMITS
-# undef PM_MODEL_RADIUS
-# undef PM_MODEL_FROM_PSF
-# undef PM_MODEL_PARAMS_FROM_PSF
-# undef PM_MODEL_FIT_STATUS
-# undef PM_MODEL_SET_LIMITS