• 2007-03-23T05:39:42 IDE Channel 1 Device Removed
• 2008-08-09T06:38:00 system became unresponsive; error message "do_IRQ: 1.189 No irq handler for vector" (power cycled by eam)
• 2008-08-10T02:29:00 system became unresponsive: error message "do_IRQ: 1.189 No irq handler for vector" (power cycled by eam)
• 2008-08-11T10:53:34 system became unresponsive: nagios error message "Socket timeout after 10 seconds" power cycled by gavin
• 2008-08-11T14:46:55 system became unresponsive: notified by kaiser power cycled by gavin
• 2008-08-11T15:28:28 system became unresponsive: nagios error message "Socket timeout after 10 seconds" power cycled by gavin
• 2008-09-03T07:40 power cycled by bills due to network hang
• 2008-09-05T05:04 system became unresponsive; error message "do_IRQ: 1.189 No irq handler for vector" (many times, also 0.189, 2.189) (power cycled by eam)
• 2008-10-19T12:30 system became unresponsive power cycled
• 2008-10-20T22:00 system became unresponsive power cycled (nothing on console)
• 2008-10-21T12:53:00 system became unresponsive power cycled by gavin (nothing on console)
• 2008-10-21T14:05:00 system became unresponsive power cycled by gavin (nothing on console)
• 2008-10-22T10:35:00 system became unresponsive power cycled by bills (nothing on console)
• 2008-10-22T10:50:00 failed pretty quickly. (warps were running) power cycled by bills
• 2008-10-30T12:22:00 system became unresponsive power cycled by gavin (nothing on console)
• 2008-11-03T11:20 system became unresponsive power cycled by bills (nothing on console) Paul was processing on it.
• 2008-12-13T17:13 system became unresponsive (time is nagios email) power cycled by bills 12-14T09:55 (nothing on console)
• 2008-12-18T08:00 system became unresponsive power cycled by gavin (nothing on console)
• 2008-12-19T14:39:00 crashed, no message on console, power cycled by eam & rodney
• 2008-12-19T18:39 system unresponsive, no message on console, power cycled by gavin
• 2008-12-20T17:33 crashed, no message on console, power cycled by rodney
• 2008-12-21T16:40 crashed, no message on console, power cycled by rodney
• 2009-03-01T14:00 system became unresponsive power cycled (nothing on console)
• 2009-03-03T11:00 system became unresponsive power cycled (nothing on console)
• 2009-03-05T13:40 system became unresponsive power cycled (nothing on console)
• 2009-06-15T17:13:13 IDE Channel 23 Device Removed
• 2009-08-31T IDE Channel 7 Device Removed (attempt to build disk #7, bad bay, rebuild failed)
• 2009-09-1 IDE Channel 7 Device Replaced with a 1TB disk - oops. BUT REBUILDS!
• 2009-10-28T17:15:18 RAID Vol Failed. Reported disk failures: 9,10,20. Unable to recover volume. Attempted to reboot system into RAID BIOS, system not booting, serial console line not detect through ippcon. Brad examined system and decided to reseat PSU 3 from the left, LED was off. System booted properly, required Brad to reset BIOS console redirection. RAID Volume failed, system boots off of CDROM.
• 2009-10-29T16:52:41 Brad replaced 9,10,20 disks, attempted to recreate volume, disk 6/7 failed immediately. (replaced 2009-10-30T10:30)
• 2009-11-06T09:18:56 IDE Channel 17 Device Failed (replaced 2009-11-06T10:48:10)
• 2009-12-15T17:44:29 IDE Channel 19 Device Failed (replaced 2009-12-15T10:45:08)
• 2010-01-04T23:20:57 IDE Channel 13 Device Failed (replaced 2010-01-05T?)
• 2010-01-15T03:10:24 IDE Channel 3 Device Failed (replaced 2010-01-15T13:33:57)