IPP Software Navigation Tools IPP Links Communication Pan-STARRS Links
wiki:IPP_Progress_Report_20120416

Version 5 (modified by heather, 14 years ago) ( diff )

--

IPP Progress Report for the week 2012.04.16 - 2012.04.21

(Up to IPP Progress Reports)

Eugene Magnier

Serge Chastel

Heather Flewelling

  • relphot on SAS.20120403
    • we need to think about how to do this more periodically on the masters.
  • sextractor
    • helped sidik with tuning sextractor for tdi
  • megacam
    • made a super-stack (stack of all MD01 u band) for various configurations of trunk and recipes. Discoveries:
      • eam_branches/20110505 looks lovely
      • r33783 looks bad
      • r31601 with r33783 ippconfig looks worse than eam_branches/20110505
      • r31601 with eam_branches/20110505 config looks good
      • from this, decided to do a binary search of trunk (using eam_branchse/20110505 ippconfig directory)
        • r31668 through r33783 all produce bad stacks
        • still doing binary search
  • czar
    • mostly uneventful, including when Cindy et al worked on the computers at mhpcc.
  • abstract aas

Roy Henderson

Mark Huber

  • ppStack continued in tracing out input warp problems.
  • ppSub revived test sets, re-visited the few recent samples from QUB page.
  • MD08 full reprocessing and MD08 refstack creation.

Bill Sweeney

Chris Waters

  • Calculations on boosting the noisemap. Using a set of detections measured on the bias images, I was able to construct a model of the amount the noisemap under measured the detector noise. As this was measured on teh bias frames, any issues with the gain should not influence this result. Calculated boost factors, and applied the result to the noisemaps and ran a footprint study in g. This did not show the expected dramatic improvement in the number of false positives.
  • AAS Anchorage meeting abstract.
  • Determined with Ken and Gene that the corner anti-glows visible on many exposures are a result of the video cells on that OTA. This suggests that we should be able to model this effect and remove it with the dark. This will remove one more detector issue that sometimes prints through into the stacks.
Note: See TracWiki for help on using the wiki.