Index: trunk/ippconfig/gpc1/ppStack.config =================================================================== --- trunk/ippconfig/gpc1/ppStack.config (revision 37290) +++ trunk/ippconfig/gpc1/ppStack.config (revision 37615) @@ -277,4 +277,165 @@ + + +STACK_CNP_PV3_IQ_1DG METADATA ## revised -- based on STACK_THREEPI/STACK_MD_DEEP_1DG -- not complete + OUTPUT.NOCOMP BOOL FALSE + OUTPUT.LOGFLUX BOOL TRUE + STACK.TYPE STR DEEP_STACK + PSF.INPUT.CLIP.SIMPLE BOOL True + PSF.INPUT.MAX F32 10.0 # + PSF.INPUT.CLIP.NSIGMA F32 100.0 + PSF.INPUT.THRESH F32 NAN + PSF.INPUT.ASYMMETRY F32 NAN + MATCH.REJ F32 4.0 + SAFE BOOL F + PSF.TARGET.AS.MAX.EPSILON F32 0.1 + ## also unclear what rej mods needed + ## + MASK.VAL STR SUSPECT,MASK.VALUE,CONV.BAD,GHOST # Mask value of input bad pixels + MASK.BLANKBORDER S32 20 # Mask blank border in final stack output + BSCALEOFFSET BOOL FALSE # MUST be FALSE for PV3 +END + +STACK_CNP_PV3_REF_1DG METADATA ## revised CNP PV3 REF stack -- not complete + OUTPUT.NOCOMP BOOL TRUE # unclear if this necessary for CNP REF + OUTPUT.LOGFLUX BOOL FALSE # + OUTPUT.REPLICATE BOOL TRUE + STACK.TYPE STR DEEP_STACK + PSF.INPUT.CLIP.SIMPLE BOOL True + PSF.INPUT.MAX F32 10.0 # CNP large FWHM, center/edge vary 1-2 pix? + PSF.INPUT.CLIP.NSIGMA F32 1.0 # sample typically on rising side of distribution (set smaller?) + PSF.INPUT.THRESH F32 NAN + PSF.INPUT.ASYMMETRY F32 NAN + MATCH.REJ F32 4.0 # need ot tune? + SAFE BOOL FALSE + PSF.TARGET.AS.MAX BOOL TRUE # Set the target PSF FWHM as the maximum of accepted input FWHM values. + PSF.TARGET.AS.MAX.EPSILON F32 0.1 # set the target PSF FWHM larger than the maximum input. Target = eps + max(input) + ## extra rej -- turn default for initial test run + #THRESHOLD.MASK F32 0.1 # Threshold for mask deconvolution (0..1) + #COMBINE.ITER F32 0.5 # Number of rejection iterations per input + #COMBINE.REJ F32 3.0 # Rejection threshold in combination (sigma) + #COMBINE.SYS F32 0.1 # Relative systematic error in combination + #COMBINE.DISCARD F32 0.2 # Discard fraction for Olympic weighted mean + #IMAGE.REJ F32 0.1 # Rejected pixel fraction threshold for rejecting entire image + #NMINPIX S32 4 # Minimum input per pixel + #MASK.VAL STR SUSPECT,MASK.VALUE,CONV.BAD,GHOST # Mask value of input bad pixels + ## + MASK.BLANKBORDER S32 20 # Mask blank border in final stack output + BSCALEOFFSET BOOL FALSE # MUST be FALSE for PV3 +END + +STACK_CNP_PV3_DEEP_1DG METADATA ## -- not complete + MASK.VAL STR SUSPECT,MASK.VALUE,CONV.BAD,GHOST # Mask value of input bad pixels + MASK.BLANKBORDER S32 20 # Mask blank border in final stack output + BSCALEOFFSET BOOL FALSE # MUST be FALSE for PV3 +END + + +STACK_MD_PV3_NIGHT_1DG METADATA ## Revised MD 8 input NIGHT stacks for PV3 -- not complete + OUTPUT.NOCOMP BOOL FALSE + OUTPUT.LOGFLUX BOOL FALSE + PSF.INPUT.CLIP.SIMPLE BOOL True + PSF.INPUT.MAX F32 12.0 # what FWHM does diffim become mostly useless, if any? + PSF.INPUT.CLIP.NSIGMA F32 1000.0 # want to use up to MAX, but sig could possibly be small? + PSF.INPUT.THRESH F32 NAN + PSF.INPUT.ASYMMETRY F32 NAN + MATCH.REJ F32 4.0 # need ot tune? + SAFE BOOL FALSE + ## + PSF.TARGET.AS.MAX BOOL TRUE # Set the target PSF FWHM as the maximum of accepted input FWHM values. + PSF.TARGET.AS.MAX.EPSILON F32 0.1 # Amount to set the target PSF FWHM larger than the maximum input. Target = eps + max(input) + THRESHOLD.MASK F32 0.1 # Threshold for mask deconvolution (0..1) + COMBINE.ITER F32 0.5 # Number of rejection iterations per input + COMBINE.REJ F32 3.0 # Rejection threshold in combination (sigma) + COMBINE.SYS F32 0.1 # Relative systematic error in combination + COMBINE.DISCARD F32 0.2 # Discard fraction for Olympic weighted mean + IMAGE.REJ F32 0.1 # Rejected pixel fraction threshold for rejecting entire image + NMINPIX S32 4 # Minimum input per pixel + MASK.VAL STR SUSPECT,MASK.VALUE,CONV.BAD,GHOST # Mask value of input bad pixels + MASK.BLANKBORDER S32 20 # Mask blank border in final stack output + BSCALEOFFSET BOOL FALSE # MUST be FALSE for PV3 +END + +STACK_MD_PV3_IQ_1DG METADATA ## revised config for MD PV3 IQ stacks -- not complete + OUTPUT.NOCOMP BOOL TRUE + OUTPUT.LOGFLUX BOOL FALSE + OUTPUT.REPLICATE BOOL TRUE + STACK.TYPE STR DEEP_STACK ## needed? + PSF.INPUT.CLIP.SIMPLE BOOL True + PSF.INPUT.MAX F32 10.0 # center/edge can vary 1-2 pix, prefer <6 pix but needs to be <10 pix for edges until code improved.. + PSF.INPUT.CLIP.NSIGMA F32 100.0 # any change to inputs can greatly impact edge filling factor.. + PSF.INPUT.THRESH F32 NAN + PSF.INPUT.ASYMMETRY F32 NAN + MATCH.REJ F32 4.0 # need ot tune? + SAFE BOOL FALSE + PSF.TARGET.AS.MAX BOOL TRUE # Set the target PSF FWHM as the maximum of accepted input FWHM values. + PSF.TARGET.AS.MAX.EPSILON F32 0.1 # Amount to set the target PSF FWHM larger than the maximum input. Target = eps + max(input) + THRESHOLD.MASK F32 0.1 # Threshold for mask deconvolution (0..1) + COMBINE.ITER F32 0.5 # Number of rejection iterations per input + COMBINE.REJ F32 3.0 # Rejection threshold in combination (sigma) + COMBINE.SYS F32 0.1 # Relative systematic error in combination + COMBINE.DISCARD F32 0.2 # Discard fraction for Olympic weighted mean + IMAGE.REJ F32 0.1 # Rejected pixel fraction threshold for rejecting entire image + NMINPIX S32 4 # Minimum input per pixel + MASK.VAL STR SUSPECT,MASK.VALUE,CONV.BAD,GHOST # Mask value of input bad pixels + MASK.BLANKBORDER S32 20 # Mask blank border in final stack output + BSCALEOFFSET BOOL FALSE # MUST be FALSE for PV3 +END + +STACK_MD_PV3_REF_1DG METADATA ## revised config for MD PV3 refstacks -- not complete + OUTPUT.NOCOMP BOOL TRUE + OUTPUT.LOGFLUX BOOL FALSE + OUTPUT.REPLICATE BOOL TRUE + STACK.TYPE STR DEEP_STACK ## needed? + PSF.INPUT.CLIP.SIMPLE BOOL True + PSF.INPUT.MAX F32 7.0 # center/edge can vary 1-2 pix, prefer <6 pix but needs to be <7 pix for edges + PSF.INPUT.CLIP.NSIGMA F32 1.0 # sample typically on rising side of distribution (set even smaller?) + PSF.INPUT.THRESH F32 NAN + PSF.INPUT.ASYMMETRY F32 NAN + MATCH.REJ F32 4.0 # need ot tune? + SAFE BOOL FALSE + PSF.TARGET.AS.MAX BOOL TRUE # Set the target PSF FWHM as the maximum of accepted input FWHM values. + PSF.TARGET.AS.MAX.EPSILON F32 0.1 # Amount to set the target PSF FWHM larger than the maximum input. Target = eps + max(input) + THRESHOLD.MASK F32 0.1 # Threshold for mask deconvolution (0..1) + COMBINE.ITER F32 0.5 # Number of rejection iterations per input + COMBINE.REJ F32 3.0 # Rejection threshold in combination (sigma) + COMBINE.SYS F32 0.1 # Relative systematic error in combination + COMBINE.DISCARD F32 0.2 # Discard fraction for Olympic weighted mean + IMAGE.REJ F32 0.1 # Rejected pixel fraction threshold for rejecting entire image + NMINPIX S32 4 # Minimum input per pixel + MASK.VAL STR SUSPECT,MASK.VALUE,CONV.BAD,GHOST # Mask value of input bad pixels + MASK.BLANKBORDER S32 20 # Mask blank border in final stack output + BSCALEOFFSET BOOL FALSE # MUST be FALSE for PV3 +END + +STACK_MD_PV3_DEEP_1DG METADATA ## revised config for MD PV3 deepstack -- not complete + OUTPUT.NOCOMP BOOL TRUE + OUTPUT.LOGFLUX BOOL FALSE + OUTPUT.REPLICATE BOOL TRUE + STACK.TYPE STR DEEP_STACK + PSF.INPUT.CLIP.SIMPLE BOOL True + PSF.INPUT.MAX F32 10.0 # + PSF.INPUT.CLIP.NSIGMA F32 100.0 + PSF.INPUT.THRESH F32 NAN + PSF.INPUT.ASYMMETRY F32 NAN + MATCH.REJ F32 4.0 # need ot tune? + SAFE BOOL FALSE + PSF.TARGET.AS.MAX BOOL TRUE + PSF.TARGET.AS.MAX.EPSILON F32 0.1 + THRESHOLD.MASK F32 0.1 # Threshold for mask deconvolution (0..1) + COMBINE.ITER F32 0.5 # Number of rejection iterations per input + COMBINE.REJ F32 3.0 # Rejection threshold in combination (sigma) + COMBINE.SYS F32 0.1 # Relative systematic error in combination + COMBINE.DISCARD F32 0.2 # Discard fraction for Olympic weighted mean + IMAGE.REJ F32 0.1 # Rejected pixel fraction threshold for rejecting entire image + NMINPIX S32 30 # Minimum input per pixel + MASK.VAL STR SUSPECT,MASK.VALUE,CONV.BAD,GHOST # Mask value of input bad pixels + MASK.BLANKBORDER S32 20 # Mask blank border in final stack output + BSCALEOFFSET BOOL FALSE # MUST be FALSE for PV3 +END + + + # Recipe overrides for STACK STACKPHOT METADATA